Solenis + NCH:<br/>Forward As One
NCH is now part of Solenis
More information
Close 686C6711-FB74-47F4-AFEE-14D0F9C09B39
Home Products & Services Process Solutions Parts Cleaning Machines, Chemistry & Service Hotwash Machines for Automated Parts Cleaning & Degreasing

Hotwash Machines for Automated Parts Cleaning & Degreasing

Clean large, complex parts and high-volume batches in minutes with a fully automated system engineered for performance, consistency, and sustainability.

Enclosed, Fast, Efficient, and Water-Based Parts Cleaning.

Experience a more efficient, sustainable approach to industrial parts cleaning, reducing energy use, minimizing downtime, and delivering consistent results through an integrated solution. 

  • Leaders in water-based cleaning: Driving the shift away from solvent-based methods with advanced, more sustainable alternatives.  
  • The only fully integrated system on the market: Machines, chemistry, and service developed and built in-house to work together to deliver consistent, optimized performance that reduces energy use and downtime.  
  • Backed by in-house expertise: Combining chemistry, engineering, and service under one roof to support every stage of your operation.  

Take the complexity out of industrial parts cleaning with high-performance, system-driven solutions from Solenis. As a leader in water-based parts cleaning, we are driving the transition away from traditional methods, delivering sustainable cleaning without compromising performance. 

Solve heavy-duty cleaning challenges at scale  

In demanding industrial environments, parts cleaning is a core process that directly impacts performance, safety, and uptime: 

  • Heavy, bulky components are difficult to clean manually 
  • Inconsistent results impact quality and rework 
  • Solvent-based systems create safety and compliance risks 
  • Downtime reduces productivity 

The ADS 800 hotwash parts cleaner is designed to eliminate these challenges, providing a load and go, water based solution for large, bulky parts.

Contact us
TORRENT ADS800
Watch now
Video 2
Watch now
Video 3
Watch now
Video 4
Watch now
Video 5
Watch now
The Only Fully Integrated Parts Cleaning Solution

Solenis delivers a complete parts cleaning solution, combining machine, chemistry, and service into one fully integrated, sustainable system that you won’t find elsewhere in the market. We don’t just supply standalone equipment or chemicals. We develop and optimize the cleaning chemistry specifically for the ADS 800, and support it with ongoing service to ensure consistent, long-term performance. This integrated approach, bringing together expertise in chemistry, engineering, and service, delivers greater reliability, improved process consistency, and a lower total cost of ownership. 

Because our chemistry is specifically designed for the ADS 800, it works in complete synergy with the system to maintain peak cleaning performance over time. This optimization enables the ADS 800 to operate efficiently at lower temperatures, reducing energy consumption while delivering the same high-quality cleaning results, supporting a more sustainable, water-based approach to parts cleaning. 

Why choose parts cleaning systems from Solenis 
  1. Pioneers in water-based cleaning - We lead the shift away from solvents with VOC-free, water-based systems that improve operator safety, reduce environmental impact, and support your sustainability goals. 
  2. A complete cleaning system, not just a machine - Unlike standalone equipment providers, Solenis delivers a fully optimized system, not available anywhere else on the market. Engineered parts cleaning machines, Application-specific chemistry developed in-house, developed for use with our parts cleaning machines, Ongoing service and support from our parts cleaning experts. Everything is designed to work together, delivering better cleaning performance and longer fluid life. 
  3. Deep expertise across chemistry, engineering, and service - Our in-house specialists ensure your process is optimized from day one and continues to perform over time. 
Batch cleaning
Handles complex parts
Applications and industries that benefit from ADS 800 hotwash parts cleaner 

Built to handle high volumes and demanding applications, the ADS 800 hotwash machine effectively removes: 

  • Oil, grease, and cutting fluids 
  • Carbon deposits and scale 
  • Dirt, grime, and production contaminants 

Typical applications include: 

  • Manufacturing and industrial processing 
  • Transportation and fleet maintenance 
  • Supply chain and logistics operations 
  • Engine and gearbox remanufacturing 
  • Component repair (e.g. cylinder heads, alternators, starter motors) 
  • Post-production cleaning and finishing 
Large-part capacity
Clean multiple parts
Built for performance, efficiency, and consistency 

ADS 800 parts cleaning solution provides: 

  • High payload capacity (250 kg) – clean heavy components with ease 
  • Large basket (800 mm) – ideal for bulky parts or batch processing 
  • Full spray coverage – top, bottom, and side spray rails ensure consistent cleaning 
  • Basket inching facility (for ease of load / unload) 
  • Programmable pre-heat – start each shift ready to clean 
  • Fast cycle times – parts cleaned, protected, and ready for use in minutes 
  • Load and go operation    

Outcome: 

  • Reduced manual handling 
  • Consistent cleaning quality 
  • Increased throughput 
  • Lower downtime 
Before Cleaning
After Cleaning
Chemistry developed in-house for use with ADS 800 hotwash machines 

ADS 800 operates using one of three chemistry solutions. The solution you use depends on the substrate, contaminant, and desired cleaning standard, but all are water-based, free from VOCs, and contain corrosion inhibitors to protect your parts.  

They are all developed in-house using our own formulations, specifically designed for use in our parts cleaning machines, providing you with a fully integrated solution that saves energy from better performance.  

  1. Storm 1 – NSF approved, with powerful oil/grease splitting action to extend fluid life. Uses the latest surfactant technology, reducing the surface tension, allowing active molecules to penetrate underneath the soil. 
  2. Power Clean - Cleaning powder formulated for the ADS hot wash. Non-foaming and contains an inhibitor that prevents corrosion during the cleaning operation. 
  3. Super Bee - Aviation industry approved allowing use in degreasing equipment within the aviation sector. Safe for use on steel, aluminum, titanium, magnesium, and copper alloys. 

All options are: 

  • VOC-free 
  • Designed for industrial performance 
  • Formulated with corrosion inhibitors 
  • Optimized for machine compatibility 

Result: better cleaning, longer solution life, lower energy usage, and lower operating costs.

FAQ 

Let us answer your ADS 800 parts cleaner questions. If you can't find the answer you are looking for, get in touch and speak to our team.

 

3 phase electricity supply – 415V, 32A, 5 pin Neutral & Earth. 

  • Automation 
  • 250kg payload 
  • 800mm basket diameter 
  • 600mm working height 
  • Pre-heat facility 
  • CE approved equipment 
  • Multiple substrates can be cleaned 
  • Multiple Solenis chemistries suited to different substrates 

140 liters maximum fill level 

3.6 to 5.5 Bar and 150 liters per minute 

We recommend and pre-set the machine to operate at 60°C 

Machine can wash for cycles of between 1 and 60 minutes 

Three Options:

  • Our patented chemistry Storm1 at 4 liters per fill
  • ADS Power Clean at 4kg Tub per fill
  • Aviation approved Super Bee at 5 liters per fill
  • Ensure the machine and chemistry is up to operating temperature  
  • Load the parts into the machine, spread them evenly around the basket to spread the weight distribution  
  • Close the lid  
  • Press the start button  
  • Machine will automatically stop at end of the wash cycle or when you hit the stop button 

A little foaming is perfectly normal, but some contaminants can cause excess foaming. To prevent this add 25ml of Cease Foam NS, available from your representative

The machine has the facility to be pre-programmed, to allow the chemistry to pre-heat up to temperature before a working shift pattern starts. For example if parts cleaning starts at 8am, the machine can be pre-programmed to switch on and begin to heat up at 6:30am, etc.

  • Ensure you have power to the machine (is there a display on the digital control panel screen) and that the machine is up to temperature (the ‘Ready to Start’ button is illuminated) 
  • Is there sufficient liquid in the sump, minimum fill level to operate is 90 liters (if the low-level light is illuminated then add more liquid to the sump to reach at least the minimum level). 
  • Refer to the user manual to troubleshoot the machine. If machine still does not start then contact Solenis. 

Speak to the parts cleaning experts

Get in touch to find out more about our professional grade and environmentally friendly solutions for your parts cleaning needs. Our parts cleaning experts will discuss your needs with you to find the right solution for your facility. 

Contact Us

Resources

We're here to help.

Whether you're building a career that lets you make a real difference or need reliable answers to your toughest process and water sustainability questions, we're ready to deliver.

Customer Support

If you have a question or need insights from a specialist, we can help.

Contact us
Customer Stewardship

From award-winning innovation to recognized safety excellence, we bring partnership and value to every interaction.

Partner with us